Forgemas 14, Eldar Corsair Hornet, More Progress...

Hi All

Done some more work on my now severely delayed Forgemas entry, my Eldar Corsair Hornet.

Above is the overall progress, following are a few shots of the details..

Two shots of the underside which is now complete apart from a little work inside the exhaust ports.
The second shot is with a flash, which brings out the yellow highlights on the green plating a little more.

And a few shots of the hornet  so far on its base...

That's it for now, the work on the underside since the last post amounts to about 10 hours. Just the top side and some detailing work like gems and such like to do now so I should be done soon.

As ever c and c welcome...

Bluddtoof

Forgemas 14; Eldar Corsair Hornet, WIP

Hi All

Bluddtoof here with another WIP post on my Eldar Corsair Hornet. This model seams to be taking forever to paint but I've finally got the yellow-white shading done on it, now it's just the green armour plating and the gems to do before a final few touches. Hopefully I'll only need a couple more weeks.

So here's a few piccies...

I'm really pleased with the shading compared to the test corsair I painted a while back, it matches well and considering the areas involved are significantly larger it looks ok. In total it's made from 14 shades; starting with averland sunset through yriel yellow to flash gitz yellow then adding more and more white to flash gitz til I got a just off white for the final edging. The pilots seat I stopped at shade number 11 cos I was happy with the colour. I think it's come out a little more lemony than the corsairs weapon, see here for the relevant post, and I like it, the trick now will to remain consistent across the rest of the army. Eventually there'll be a Revenant Titan in these colours! That'll be a challenge, I may need to invest in an airbrush at that point.

Next step is the green plating with its yellow highlighting.
Hope you like it so far, c and c welcome as always. More to come soon.....

Bluddtoof

Forgemas 14; Eldar Corsair Hornet, WIP

Hi All

Just a quick update on the WIP of my Eldar Corsair Hornet; I've done most of the metallic bits, I decided to go a little darker than I'd originally tried on the test corsair, I'll see what I think once it's done as to whether I stick with it for the rest of the army.
Currently working on the yellow to bone white shading sections of the model, it's a long process, what you see below comprises 5 shades getting respectively lighter from a base of GW averland sunset, when finished it will shade right down to a bone white as on the muzzle of the test figures shuriken cannon.
You can see the post of the original test figure here.
Pics of the wip...

That's it for now, more to come soon.

Bluddtoof.

Pre Heresy Death Guard - Showcase of Progress So Far

Evening All,

Doc here to showcase the progress on my Pre Heresy Death Guard (PHDG).  For those that haven't read any previous posts the idea with my PHDG the idea with the army was to always create a multi use force for 30k and 40k as a space marine army.

Its also meant to use all new the skills I have been perfecting across an entire army.  The project has certainly evolved since I started.  I have realised I will use more forgeworld models than originally intended.  I think when I finally get round to 30k I want the look of 30k.

Onto some completed models.  Tactical Marines:

 This is all the tactical marines I have painted so far and as you can see I'm covering off lots of armour patterns!  Later on they will be organised into squads of the same armour pattern.  It will also aid on the battelfield when two squads get near each other.  There is still some transfers and weathering to do to tie them all together.  This hasn't been done as I haven't fully decided my methodology. The most recent additions are the forgeworld MK3 marines which I have taken some close up shots of:

 These models utilise the sponge weathering used on the contemptor dreadnought showcased last week here.   I will be adding some weathering powders on the lower legs and then I consider this to be the finish I want.  Weathered but without removing too much of the white.

I have also made progress on a 40k Sternguard squad in the same colour scheme:

 Only 4 done so far but on the whole happy with the finish.  Although I will be fixing the error on the heavy flamer back pack, followed by transfers, sponge weathering and weathering powders.  This army really is a slow burn but hopefully in the end it will be worth it.

A couple of posts ago I published my hobby objectives for 2015, and getting this army to a playable state this year would be a fantastic achievement!  I have many more models started so now I just need to knuckle down and get some more finished.

This weekend in true DOC style I started some more.....

 Hopefully these will meet the undercoat can in the next two weeks or so (Weather dependent).  For info I have deliberately left the other arms off the heavy legionnaires.

Well that is me for a bit comments and feedback always welcome.

That's All Folks

DOC Out

Forgemas 14, Eldar Corsair Hornet Update; Base Complete

Hi all

Bluddtoof here with another update on my Eldar Corsair Hornet; the base is now complete with the addition of the hunted Guardsman and his abandoned kit...

I painted the guardsman in muted colours so he wouldn't stand out too much, the Hornet is the main event here after all. I chose green, grey and brown shades as these will tie him into the base colours.

he's painted quite simply, with just simple highlights and washes.

I took a few shots with and without the flash and with a really strong light source off to one side too...

Hope you like it so far, I'm working on the hornet itself now, more to come soon..

Bluddtoof