Showing posts with label OSL. Show all posts
Showing posts with label OSL. Show all posts

Monday 23 May 2016

Showcase - Pre Heresy Dark Angels Leviathan Dreadnought

Hi All,

Heres my first post on my own without the watchful eye of doc, showcased here is my newly finished 30k pre heresy Dark Angels Leviathan Dreadnought with storm cannon and grav flux bombard, to start I thought I would pose him a bit differently by mounting his foot on a 30k marine, I airbrushed the body in a mix of black and grey, painted all the ancillary colours (silver and red) then highlighted the model. And added a few washes , the grav flux I have used a bit of OSL in a jade green did not want it to bright, I weathered the model with a mix of weathering powders and sponge not tried that before result came out OK as for the base I carried on my theme of Mars using forge world runs weathering powders , I painted the mk3 marine world eater Colours . Hope you all like not done this before a lot more things to learn.
Here are a few pics:









I have a lot more to showcase on here but as with me all this new stuff takes me a little time to figure out what I'm doing. C and C are very welcome to point me in the right direction.

That's all for the moment

Innermech signing off.....



Tuesday 10 June 2014

Imperial Knight Freeblade W.I.P. The Build

Hi All

So now that our day of Deadzone is done, (and a great day it was, a cracking game which is ideal for a group day letting, everyone play several games), it's time for my next project; my Imperial Knight!
Firstly it's a really nice kit, easy to build and goes together nicely, I'd originally intended to magnetise many of the parts so as to give me the flexibility of main weapon options and also to have a model which was easy to transport but was held solidly together on the table, alas it has not come to pass because none of the joints between arms/body or body/legs lend themselves to the placement of magnets, I've not tried magnets before and I want my first attempt to be on a model that does lend itself easily. As for the possibility of using magnets to allow swapping out of the main weapon, that also proved impractical for two reasons; the two variants both have different power feeds that connect to a common point but the Thermal cannon feed originates from a piece which is hidden inside the main body of the gun and so cannot be removed, also the battle cannon ammo pack is hollow and so would need extensive remodelling to provide an anchor point for the magnet. In short I decided it was too much work for a first attempt and I've settled on the Thermal Cannon and I will fix the torso to the legs but leave the arms separate as they have a nice twist and lock connection to the torso.With this set up the model will fit snugly in a figure case.

So on to the model itself, I've built all the sub-assemblies and the next step will be to undercoat them.
The model will be fielded almost exclusively alongside my Space Marines, the Thunderbolts who feature a rock and snow theme on the basing. The Knight is a big imposing model anyway but I wanted it to be more so, originally I'd had the idea that I would model it stepping up onto a snow covered rocky outcrop, however the legs are moulded as a rigid piece for their entire length so no convenient knee joint, I looked at the knee with a view to cutting and reposing but the mould has no material to play with and so I would have needed to sculpt the whole knee section which is beyond my sculpting talents, the last thing I wanted was to give my beautiful model a gimpy leg!! I settled on mounting the model on a large rock outcrop, thus raising it even higher over it's foul enemies! The rock is modelled from thin sheets of balsa glued together and held with elastic bands overnight, once dry I cut away at it to create the broken and eroded shape, the layers give the appearance of a slate outcrop. Then an all over coat of thinned PVA to seal the balsa. Once dry I glued the legs sub-assembly in place and then I applied the rocks, gravel and then sand in stages letting each stage fully dry before the next. One benefit of using balsa instead of sculpting from a modelling clay is the base is very light so I didn't need to be too concerned over the bond between the models feet and the rocks.
Here's pics of the base prior to undercoating...




You'll notice I haven't attached the shin guards or the crotch banner as these will be painted separately and attached at the end.

In total I'll be painting the model in 12 pieces, firstly to break up the monotony of painting very large areas at a time and secondly to minimise the amount of areas which are hard to reach.



Painting pieces like the banner and the shoulder guards will also be easier as I'll be attempting some freehand work on the Knights heraldry, he's going to be a freeblade, I'm still working on the design for his heraldry.
The other technique I'll be trying for the first time is OSL, which I'll be using on the eye lenses and the face mask.

That's it for now, more to come over the next few weeks....

Bluddtoof