Showing posts with label Fence Panels. Show all posts
Showing posts with label Fence Panels. Show all posts

Saturday 23 April 2016

Showcase; The Cypra Incident, Watchtowers and Fencing.

Hi All

I've now completed the Watchtower and Fencing project for our upcoming campaign; The Cypra Incident, which will see Space Orks and Imperial Guard battling it out in a swamp initially. I'll go back at a later date and add a few more pieces to the set, such as 2 more intact towers, a ruined tower and some barbed wire once my order arrives.

I'm pleased with the finish, very rusty and aged, just what I'd aimed for. Also tried sponge weathering for the first time and I'm very pleased with that, I'll be using it again for sure.

Here's some pics...















As you can see the set is a decent size (that's a 4 x 4 board) and has plenty of scope for variation of lay-out. Overall I'm very happy, the project turned out better than I'd hoped and the modular system is ideal.

As ever c & c welcome. Hope you like it. Next up I'm going to build and paint something for my Marine army, the Thunderbolts, more to come on that soon.

Bluddtoof.

Monday 4 April 2016

The Cypra Incident, more terrain WIP.

Hi All

Bluddtoof here with some more WIP on my current project; the fencing terrain for our upcoming narrative campaign; The Cypra Incident.

I'd planned a post over the weekend and even took photos but didn't get round to it so this post contains photos from a couple of stages in the process.

First some photos of the tower after I'd added some plasticard sheeting to give a smooth metallic finish and started adding rivets to this panelling....






Then I moved on to painting, all the pieces got a solid black base coat sprayed on followed by a coat of silver; I used a spray by Plasti-kote, I've used this before and found that it covers exceptionally well but has a glossy finish which doesn't like to accept further painting. I tried a single small piece of scrap plasticard first and tried out a new method for applying rust effects, namely sponge weathering.
It worked really well; using successive coats of Dryad Bark, Dark Flesh, Khorne Red and Troll Slayer Orange I built up a heavily rusted effect, a final light sponging of Caledor Sky gives an impression of flakes of the original blue paint still clinging to the heavily weathered metal.
To finish off the effect and to smooth it all together I washed all the pieces with Reikland Flesh, followed by dabs of Seraphim Sepia and finally Agrax Earthshade whilst the 1st wash was still wet, this has the effect of randomly blending the 3 shades giving a really dirty finish, I use this method on my Orks too.
On the uprights I wasn't quite happy and wanted an even more rusty look so I tried an orange wash all over them.
This pic was taken after I'd finished the sponge work...



Here's a few pics of the set as it stands now...








So not much left to do now, all the uprights need their bases doing, this will involve mud and some swampy plant life. I plan to have vines and creepers climbing the uprights and some of the panels too. I'll probably leave the tower, however I've got some barbed wire on the way which will be formed into coils to sit on top of the fence and form a protective "shelf" around the tower below the parapet.

Then of course I need to build and paint at least 1 more tower, eventually there'll be 4 intact towers and a couple of collapsed ruined towers as well.

That's it for now, more soon....

Bluddtoof.

Monday 28 March 2016

The Cypra Incident, Scenery WIP

Hey all,


Bluddtoof here with a quick update on my work on the scenery set for mission 2 of our upcoming narrative campaign.
I've now completed the build of the fencing (20 uprights with various configurations of panel supports and a total of 14 panels, 3 of which are ruins and a set of hinged gates) and have started on the first watchtower.
Here's a few pics of the tower ....









The first 3 are the balsa carcass in progress and the last 3 are with the watchtower complete with a basic roof and with some fencing in a couple of possible configurations.
The issue now is whether I leave the tower as is and paint it, in which case the grain will show, or I'm considering plasticard cladding to simulate metal, complete with rivets. The second option will look far better but will involve a lot more work and this is tower 1 of 4! I'll make that decision tomorrow I think. One thing I will change is the mesh flooring on the other towers; I'll not cut out the central hole in future, it doesn't really show once occupied and limits model placement, a full mesh floor with a hatch will be better.

More to come soon, as ever comments welcome...


Bluddtoof.

Tuesday 15 March 2016

Perimeter Breach! The Cypra Incident, Scenery WIP.

Hey All

Bluddtoof with another WIP post for my Fencing Terrain project.
I've completed all the uprights now and 2 more damaged and breached fence panels.
I currently have enough tubing to make 5 more panels but with an order on the way I'll soon be able to complete plenty more. As I stated in the previous post I want at least 12 intact panels so we can simulate a large intact compound, the broken one swill allow for a ruined compound effect.
Here's a couple of pics of the work so far...





Hope you like, as ever C and C welcome.
More to come soon...

Bluddtoof.

Sunday 13 March 2016

"Don't Fence Me In.....", The Cypra Incident. WIP.

Hey All

Bluddtoof here with the first WIP post for a new terrain set I'm building to be used in our upcoming Narrative Campaign; "The Cypra Incident".
As I said in my last post Doc and I need to represent a military compound in the 2nd mision of our story, whichever way it goes; either an Imperial Compound or an Orky scrap yard. So we decided a set of fences and watchtowers would fit in either scenario.
To this end I've started on a set of fencing panels and uprights; I wanted a flexible but simple set which would be easy to store and light and manageable on the table. Here's what I've come up with...



The above shot is of 2 uprights and 1 panel, the 3 pieces are separate and thus the whole set will be flexible enough to lay out in lots of ways, some of the uprights will have supports at right angles and a few will be 3 or 4 way supports to allow for more flexibility.




Above shows a damaged panel in 2 different positions, to provide stability and strength the uprights on either side of the broken panel are fixed. I intend to make a max of 3 of these breached panels, the rest will be intact and fully flexible.
The bases of the uprights will also get some scenic work; tufts of grass and vines and such. I'll also be adding a few rivets to the upper panel supports.

The raw materials are pretty basic;

Uprights: small GW round bases, Plastruct 4.8 mm styrene tubing, 1 mm plasticard and Plastruct 4.8 mm styrene column.

Panels: Plastruct 3.2 mm styrene tubing and Isopon aluminium mesh (for repairing holes in car bodywork)

The mesh I bought at my local hardware store at a couple of quid per sheet which makes 4 of the 5"x 3" panels , the Plastruct products I got from Antics on line, they can be a bit pricey but you get 6 or so lengths per pack.

I'm planning on a dozen panels or so, a gate section and then 4 watchtowers which will comprise a small square bunker 6" tall with a roofed parapet on top, the top section will be removable to access the interior. In terms of area, they will house a small squad of infantry; 5 models I think to allow for combat squads or weapon teams. I don't want them too big or to be major bunkers. The towers will have panel supports in the middle of all four faces to allow full flexibility of set up.

As for the paint job; I'm planning on rusted metal, I'll be trying some rust effects I've not tried before.

More to come soon. As ever C and C welcome and stay tuned......

Bluddtoof.