Showing posts with label Cerastus Knight Acheron. Show all posts
Showing posts with label Cerastus Knight Acheron. Show all posts

Friday 8 July 2016

Cerastus Knight Acheron - WIP #2

Hi All,

Wowsers I have been away from the blog and hobby for a while, apologies for that and now it is time to get my mojo back! It is also bad timing as traditionally code40k members tail back the hobby work over the summer months meaning blog posts have been a little thin on the ground.  Anyway trying to get back going again now...

So I have gone back my Knight Acheron and for those of you who need reminding or missed it the original build post is here and the first WIP is here.

In order to go any further I need to get all the waterslide transfers in place or decals depending on where you are in the world.  I have bought the House Makabius set from forgeworld.  This is mainly because I intend to paint 4 knights in this colour scheme.   Over the years transfers have been a bane and I still dont like them but since switching to the Micro -Set and Micro Sol method it has become easier.  I would recommend the following youtube video for an explanation:


And the following video as a tutorial:



Here are some photos of the transfers in place before weathering:






My main top tip for this post is to always apply the transfers before weathering which is a mistake I made a while back. To not do so means they look out of place and pristine with the rest of the model looking weathered.  As you can see from the pictures above I have successfully applied all the transfers.  The most difficult transfer which is not pictured is the banner transfer which hangs between the legs.  The banner is curved and the micro sol came in particularly handy for the banner piece.

So with transfers applied the next stage will be to complete the base and then finish weathering followed by completed assembly.  I hope to show you a completed knight in the next two weeks.

So nice to be back in the saddle 

Cheers

DOC out



Friday 22 April 2016

Cerastus Knight Acheron - WIP #1

Morning All,

I have been working away on my knight acheron.  I wanted to get it to a usable state whilst I await delivery of transfers to finalise the model.  I have taken the odd photo along the way to show you some progression.  This has been a really enjoyable process so far and I look forward to the final model being finished.


I had already decided to loosely follow the House Makabius colour scheme although I decided on a metallic brighter blue than the forgeworld example.  To test it out I just did one shoulder pad.   The airbrush finish on the blue and cream is so flat and makes me wonder why I would ever do it the "old way" again.  At this stage no washes had been applied.


From here I upscaled to multiple panels including masking the shin plates to ensure a crisp line between the cream and blue.  For info I use the tamiya masking tape range for this purpose.





Snap from a couple of nights ago showing the chaos of it all


Flamer tanks completed.....  A whole mass of effects and mediums used on here.  Airbrushed vallejo silver.  Some areas airbrushed vallejo rust.  Then washed with agrax and nuln oil.  Drybrushed boltgun metal.  Next I went in with a whole load of effects to weather it up using the products below.


So as usual with me after this point got really into it and picked up the pace now I was comfy with the colour scheme and techniques below is a picture of the knight as it stands.  Still decals, weathering, base and many more little jobs to do.





What do you all think so far, any advice?  Hope to have it all finished in the next few weeks.

Cheers

DOC out