Waaaghhh!!!!!! Bluddtoof wip

With SVA XII and Carnage looming close I'm getting a few new bits and bobs together for my 5 new lists I'll need for them. Sounds a lot but as my Orks are my most prevalent painted stuff I've got the vast majority of what I need already done.

Just built Trukk number 5 and here's a few photos...........

As you can see I've used the Forgeworld Ork half trakk upgrade kit, not a bad price considering you get a full plastic trukk kit as well as all the resin trakks, wheels and engine. You're left with plenty of extra bits, specifically wheels and an engine with which to make another trukk!! Huzzah!! 2 trukks for about £35. As long as you've got plenty of bits lying around, which any self respektin Mek should have or course!

So the kit........

...as with all resin..... FLASH! And plenty of it, especially around the trakk linkages, take your time and it comes off with a nice sharp craft knife to leave a really impressive mould, well impressed with the quality and Orkyness of the design.

Not too tricky to assemble either but you have to remember it's Orky so it's meant to look uneven and wonky and once I'd done the chassis it looked good and was quite strong and rigid.

The engine blokk is made to connect to the drive shaft of the plastic kit as with the original however the resin gearstick was a pain to get in place so I ended up swapping it out for a scratch one. Don't try to use the original plastic one as it won't be in the right position and hits the front bulkhead of the cab section, stopping correct positioning of the cab.

I also bought the Forgeworld Ork weapons set which is a fantastic assortment of Big Shootas, Skorchas and Rokkit Launchas; 11 weapons altogether with mountings and all unique too. So one of those went on in place of the original plastic one. All helps to create the desired impression of each vehicle in my Waaaghhh! being a unique creation of the competing Meks.

I'm now working on Trukk 6 which again uses Forgeworld upgrades, this time the Enclosed Kab Trukk kit. Piccies of this in due course........

Waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaghhhhhhhhh!!!!!!!

Boss Bluddtoof

This years objectives

So another year beckons, and this year I'm setting objectives which I will achieve!!!!
Last year was a total washout on the objective front, with one thing and another.

So my objectives for 2012.................

1/ Complete Space Orks 1750/2000 pt lists for the Carnage and SVAXII tournaments in late march. (Not too much to do now; paint 2 trukks, 3 buggies, 10 assorted infantry.)

2/ Finish my Klawstompa!!!

3/ Design, build and paint a Kustom Stompa!!! (Bringing my collection to 3 Stompas!!!!!!)

4/ Take a break from 40k.........and............

5/ Start my First Fantasy army in over 20 years!

This will be a Bretonnian army, and yes I know they're a bit weak in the new edition, in desperate need of a new army book but this will be a long term project and I'm unlikely to have a painted army this year so hopefuly by the time I'm ready to take to the field of honour the new book will be here.
Most important to my decision to go with Bretonnians is that I can paint every knight as an individual, with his own unique colour scheme and styling. Only the plebs will need to be painted in uniform, which is good 'cos my downfall in the past has been that I get bored painting lots of identical models and thus my previous fantasy forays have ended prematurely with 1/2 painted units.

I'm not gonna set a target number of models, just paint as much as I can and enjoy the experience.

On that note I played my first game of Fantasy since the early 90's at the weekend and thoroughly enjoyed it! So Huzzah! Soon my glorious Knights will take to the field and smite all those who would turn a wicked eye to those lands under the protection and blessing of the lady of the lake. Have at you Cur!!!!!!!!!

Ghost Ark and Glue Nightmares

Hi All, Since last weeks post ive played 3 games with the crons and painted a Ghost Ark. Be warned a Ghost Ark is a difficult kit and required many sub assemblies and paint before be finally put together. I also had a little accident along the way where by i spilt an entire bottle of liquid poly over the 10 repairing necron warriors whilst they will still in pieces on my cutting board. After screaming at the top of my voice i managed to save all the components although some have lost some detail as the liquid poly melted them. So here is some pictures of the completed model some genuine feedback is always most appreciated and i will say i really took my time to get the finish you see here but would still like to improve it further if possible. I also followed Luko Dakka's advice and applied gloss varnish to all the green necron power sources on the model this inluded the guns, orbs and engines. If anyone would like to know anything else about the model leave me a message? and i will endeavour to give a usefull response.

Id also like to share with you mine and red mists basing strategy for the necron army which is snow and dead world theme. We are using a dead looking static grass and a snow paste. In addition i found some green crystals on www.wayland.co.uk called anarchy crystals. We felt these matched perfectly the power source green running through the army.

Another step completed towards the 2012 objectives list.... Until next time DOC

Crontastic, Converting, Dookie, Lots to Do

Hi All, So everytime i post i do it at 1 hundred miles an hour (NOT TODAY). One of my personality traits is i want it done yesterday alas this runs into my hobby sometimes at the detriment of the quality of what i produce. So im going to try and make an effort to slow down a little both with my blog posts and my figure quality. Although i will never be an eavy metal painter i consider myself a quality journeymen when it comes to painting. However, the first thing i want to talk about is liquid green stuff and how much this will change all our geeks world and speed up stuff (a contradiction to what i said above). So on to the example below is a top down view of a recently built necron immortal as with many models you can clearly see the joint between the shoulder pads and can even see the nicks where it has been clipped off the sprue. (Apoligies about my picture quality a new camera will be along in the summer)

So out came the pot of liquid green stuff and after talking to the GW guy earlier today i just applied it with an old brush in under two mintues.... The result is as follows..

So this picture was taken well the green stuff is still wet. All i have to say is how easy is that and when its dry i can either add some more or file it down... absolute genious product, well done GW. Ok so the post title mentions DOOKIE and for those who dont know its a green day album quite old now but pure punk rock and i love it! For me modelling is as much about the music as the modelling so dust of the old CD's and get them on. In my opinion you cant go far wrong with DOOKIE...... and to open a debate SHE is my favourite track but then they are all good.

So i have to paint two thousand points of Crons by March the 17th for the code's annual trip to SVA in Reading. My main problem is what to take in the army? Thus far ive played three games and yes everone on the tinternet is right a scarab farm is mint. It is however predictable and frankly not why i play 40K to win at all costs. First off SVA is a campaign weekend and more chilled out atmosphere where many fluff armies come out to play. So in the first three games i played i was trying as many units as possible including the much maligned ones! (Destroyers, Deathmarks and Flayed Ones) Ill post some lists as i get it down what i think works for fun and competitiveness. As you can see above i have already built 10 new immortals with Tesla's. This left me with 10 deathmark sniper arms. A waste in my opinion so using a warrior box much cheaper than an immortal box i set about making a deathmark...

So the guy above is built using the following components.. Back, Head, Gun and Gun holding arm from the immortals sprue. Chest and Legs from the warriors sprue. Lots of Green Stuff. Basically you have to take the chest and cut the indent of the back to make it flat. It will then fit to the deathmark back although it will look to small. I just glued it to the centre of the back plate. When it was dry i extended the chest plate carapace with green stuff. I then glued the figure together. When it was dry i made the front half of the shoulder pads with green stuff. Traditionally having been a cut and shut converter this is difficult to get to match the back half of the shoulder pads. Not bad for a first attempt?? So there you go cheaper deathmarks. When ive finished more of them ill post more pictures. Coming soon converted crypteks...... Crons will take the universe we are the oldest DOC

Darth Darlo joins the fold

First time caller, long time listener. Thanks for the invite.