Bluddtoof here with another WIP post of my Eldar Corsair Hornet. Nearly there now, should only need a couple more sessions to get this piece finished. A pic of its current state...
As you can see I'm working on the green plating on the hornets upper face now, I've finished the pilot who is now ensconced in the cockpit with the canopy now fixed in place. Fitting the pilot was a chore as I knew it would be; I'd tried many trial runs before and during painting.
The issue, if you're planning on building your own hornet, is two-fold; firstly the control panel the pilot is connected to has to slot inside the cockpit underneath the lip of the outer plating, so it has to be placed inside the space first. Secondly the pilots shoulder plates are wider than the cockpit opening so also have to go inside first!
I'd spotted this well before painting started and tried a few ways of fitting him, I decided to paint him as a sub assembly as painting him in-situ would have been a nightmare and I wouldn't have been able to get the finish I wanted. The trick was to paint the pilot without putting too much on the shoulders so as to not make him even wider at that tricky spot and then when it came to squeezing his shoulders through the gap to be super gentle. The process resulted in some minor wear of the paint around the cockpit edge, which is covered by the canopy frame anyway and a little wear on the back of the pilots shoulders which are not visible; so Huzzah! Success!
The weapons are now almost complete, gems and lenses done, the green cowlings are being painted alongside the made hull as all the shades are identical and I need to do a little more work on the cables. Once the green is highlighted up to yellow and glazed all I'll have left on the hull are the gems and a few bits of touching up.
A few more pics....
Hope you like it so far, c and c always welcome. More to come soon, in the form of a showcase with any luck.
Bluddtoof
