Imperial Knight Freeblade, W.I.P, carapace on.

Hi All

Bluddtoof here with an update on the WIP of my Imperial Knight Freeblade.
As you can see I've now completed the upper carapace with lots of lovely thorny vines.
Here's a few piccies....

I'm now working on the arms and attempting to magnetise the shoulder pads so I can keep the arms removable. Tricky tho as the magnets I have are a bit large, I'll be sourcing some smaller ones.

That's it for now, more to come later...

Bluddtoof.

Imperial Knight Freeblade, Work in Progress.

Hi All

Time for another update on my progress with my Imperial Knight; I've finished the base and legs now apart from the final weathering which I'll be doing all in one go once the models complete so as to ensure I get a coherent and consistent finish.
Here's pics of it so far...

I'm pleased with the banner sculpt, I've not put the lightest highlights on the red and bone on it that you can see on the plating or the gloss finish, as the banner will  be a tattered piece of grubby cloth once the weathering is done, with the heraldry just showing through the dirt and grime of decades of war without the support of a knightly houses tech servants to repair it.
I've given all the gold trim another coat of Lamentors Yellow Glaze to bring it up a little more. The clenched fist is a transfer and the vines and thorns are all freehand.

Next step is to move onto the torso sub assembly, less plating on that so it should be a little quicker to paint.

More to come soon....

Bluddtoof.

Imperial Knight Freeblade Work In Progress

Hi All

A quick update on my progress with my Imperial Knight Freeblade. I've made quite good progress this week and the legs and base are almost complete.
Here's a few pics....

As you can see the base is now done, the rocks were painted in a dark grey base and washed black then dry brushed with a series of lighter greys up to a final very light brush of white. I've tried to create a few rivulets of frozen ice and water trickling between the rocks; these were initially painted in a pale blue and then highlighted right through to white, they were then gloss varnished.
The snowy areas were first painted white, quite roughly, just to give a good base of colour, I've found that putting snow flock on top of a non white base gives it a dirty grey look. The snow itself is bicarbonate of soda. This is the first time I've used it instead of white flock and I have to say I prefer it, I think it gives a more powdery look, it was simply sprinkled generously over a thinned coat of pva glue and left to dry. The excess was harder to get rid of than snow flock.
I wasn't happy at this point though with the icy trickles, they weren't shiny enough so I decided to use a little water effects on them......this was almost a terrible mistake as I hadn't taken into account the bicarb! It reacts with water (and other liquids) the base went a bit frothy as bubbles appeared all around the edges of the "water"! Thankfully they did dissipate with a little help, next time I'll use the water effects before the bicarb!

Here's a close up of the heraldry I've gone for....

As you can see it's a mix of transfers and freehand vines, I'm pleased though it's a shame about the quality of printing on some of the fist transfers. Each example of thee heraldry will be slightly different depending on the area of the model it appears on. The plates were given a gloss varnish before applying the transfers so as to give a better fix and reduce the noticeable shine common with transfers.

I'm leaving the weathering to the very end once it's all done and put together so I can weather the model as a whole. That will be a first for me too as I don't usually go in for weathering. I'll be experimenting with weathering powders so any hints or tips will be most welcome.

Hope you like it so far, feedback is as ever welcome. I'm currently working on the 2 shin guards and a tattered crotch banner I've made from green stuff (you can see them in the background of the first shot). More pics to come soon......

Bluddtoof

Imperial Knight Freeblade W.I.P. The Build

Hi All

So now that our day of Deadzone is done, (and a great day it was, a cracking game which is ideal for a group day letting, everyone play several games), it's time for my next project; my Imperial Knight!
Firstly it's a really nice kit, easy to build and goes together nicely, I'd originally intended to magnetise many of the parts so as to give me the flexibility of main weapon options and also to have a model which was easy to transport but was held solidly together on the table, alas it has not come to pass because none of the joints between arms/body or body/legs lend themselves to the placement of magnets, I've not tried magnets before and I want my first attempt to be on a model that does lend itself easily. As for the possibility of using magnets to allow swapping out of the main weapon, that also proved impractical for two reasons; the two variants both have different power feeds that connect to a common point but the Thermal cannon feed originates from a piece which is hidden inside the main body of the gun and so cannot be removed, also the battle cannon ammo pack is hollow and so would need extensive remodelling to provide an anchor point for the magnet. In short I decided it was too much work for a first attempt and I've settled on the Thermal Cannon and I will fix the torso to the legs but leave the arms separate as they have a nice twist and lock connection to the torso.With this set up the model will fit snugly in a figure case.

So on to the model itself, I've built all the sub-assemblies and the next step will be to undercoat them.
The model will be fielded almost exclusively alongside my Space Marines, the Thunderbolts who feature a rock and snow theme on the basing. The Knight is a big imposing model anyway but I wanted it to be more so, originally I'd had the idea that I would model it stepping up onto a snow covered rocky outcrop, however the legs are moulded as a rigid piece for their entire length so no convenient knee joint, I looked at the knee with a view to cutting and reposing but the mould has no material to play with and so I would have needed to sculpt the whole knee section which is beyond my sculpting talents, the last thing I wanted was to give my beautiful model a gimpy leg!! I settled on mounting the model on a large rock outcrop, thus raising it even higher over it's foul enemies! The rock is modelled from thin sheets of balsa glued together and held with elastic bands overnight, once dry I cut away at it to create the broken and eroded shape, the layers give the appearance of a slate outcrop. Then an all over coat of thinned PVA to seal the balsa. Once dry I glued the legs sub-assembly in place and then I applied the rocks, gravel and then sand in stages letting each stage fully dry before the next. One benefit of using balsa instead of sculpting from a modelling clay is the base is very light so I didn't need to be too concerned over the bond between the models feet and the rocks.
Here's pics of the base prior to undercoating...

You'll notice I haven't attached the shin guards or the crotch banner as these will be painted separately and attached at the end.

In total I'll be painting the model in 12 pieces, firstly to break up the monotony of painting very large areas at a time and secondly to minimise the amount of areas which are hard to reach.

Painting pieces like the banner and the shoulder guards will also be easier as I'll be attempting some freehand work on the Knights heraldry, he's going to be a freeblade, I'm still working on the design for his heraldry.
The other technique I'll be trying for the first time is OSL, which I'll be using on the eye lenses and the face mask.

That's it for now, more to come over the next few weeks....

Bluddtoof