Eldar Corsairs, The New Base Colours

Hi All

Here's pics of the first corsair model with the base edging and lower surface repainted in shaded greys rather than the original silver.

 

I definitely prefer this, it will also lend itself better to the scenery set I will eventually build to match the army.
As ever comments please.

Bloodtoof

Sons of Horus Justaerin Terminators - The Beginning

I would consider myself a forgeworld fanboy, I actually do love it. So I've finally decided, that for my heresy army, I am going to plump for the instigators, the original bad boys, the Sons of Horus.

I recently picked up my first batch of Heresy era models at the Forgeworld Open day along with the Betrayal book. I've picked up Abaddon & Loken, some Justaerin Terminators & a pack of MKIII Iron armour marines with SoH shoulder pads and phobos pattern bolters.

I've decided to start with the 1st company Justaerin Terminators as I later want to move on to Abaddon so I think it will be nice to have him and his squad finished together.

Now we all know Forgeworld stuff costs a small fortune so the army will be bought in stages. That way I can do 2 things, await the Horus, SoH Contemptor and Catalan Reavers release & I can also save for the next batch whilst finishing what I have currently. Well thats the plan!

I am going to go to town and then some on these guys. I'm not interested in timeframe, they will take whatever they take. I'm going to be be doing every technique I know on these - hairspray, osl, chipping etc so i'm hoping for great results. We shall see :-)

So first things first, bases. Now in the past i've been an advocate of the resin bases but this time I wanted some thing a bit more custom. That way I can replicate it whenever I want, without having to buy a load more resin bases.

So here are the Justaerin Terminators bases built and now ready for basecoating

Made using a combination of wood chip/bark, sand, slate, guitar strings, copper wire, resin & brass bits from the 40k basing kit.

Next will be the terminator build, they are currently being snipped, filed & cleaned up including a little green stuff smoothing out.

Till next time

Luko Dakka

Eldar Corsairs, The New Project, The First Painted Model

Hi All

So here it is the first finished Corsair, I've really enjoyed painting this and I like the scheme, I wasn't sure about it which was why I started with just a single member of the squad.
It fulfils my philosophy of painting gaming miniatures; most of the time you'll be looking at them from 4-8 feet away so they need to stand out, with high contrast and bright colours. The vast majority of current armies I see online have a darker, more realistic and weathered paint scheme which may well be fantastically painted and looks amazing in a cabinet and I fully appreciate and applaud the skill and quality of such work but on the gaming table these kinds of finishes seem to disappear into the background, I like to see a well painted army stand out on the battlefield where it belongs.
Anyway enough of that... Here are some piccies of the finished Eldar Corsair with Shuriken Cannon.......

I think it's come out well, I'm particularly pleased with the yellow to white shading and the base however I'm not sure of the silver base, I may change it to a weathered concrete grey instead.
As ever feedback is always welcome.
Whilst I spend a couple of weeks mulling over this colour scheme I'll be painting a couple of bits for my marines...
Bye for now....

Bluddtoof

Eldar Corsairs, The 1st Squad

Hi All

The bases are built as seen in my last post, so now for the squad itself. In terms of equipping them, I want to be able to stay at range and use their jet packs to keep moving so they need the longest range weapons available which means Lasblasters instead of shuriken catapults and I'll only be equipping 2 models per squad with special/heavy weapons, namely an Eldar missile launcher and a shuriken cannon in each squad. The fusion guns are nice but to use em you've got to be up close, not where I want my corsair infantry to be, I'll use my vehicle support and flyers for anti tank duties.
The squad will be churning out 24 lasblaster shots, 3 cannon shots and a missile each shooting phase at 24" range and then using jet packs to reposition in the assault phase. Sounds like a plan to me...

Anyway here's a few pics of the models themselves....

The models will be painted without their guns in place to make life easier, and then they'll be fixed in place once painted. As you can see in a couple of the pics I based the Felarch much earlier and originally had much fatter rivets but I didn't like em so I swapped to the filter balls method.
The models are nice to build, with the resin upgrade parts meshing easily with the plastic guardians.
The worst part was the flash on the jetpack vanes and quite a lot of warping in them too but they're nice and thin so were easy to reshape with just the warmth from my hands.
Next will be painting the first model to see if I like the colour scheme.....

Bluddtoof.

Eldar Corsairs, My New Project, Modelling the Bases

Hi All

So Worcester War 13 has been and gone and now it's time to start something new.
Last year I went to Warhammer World with some of the code boys for the Carnage tournament and whilst there I picked a few nice forgeworld bits and pieces for my long planned Eldar Corsair army.
With the release of Doom Of Mymera last year I'd written a few little lists and knew roughly what I wanted, namely a jet pack heavy infantry army with some heavy vehicle support. So most of that is bought in one form or another and just waiting for some glue and paint....
To start with I'm doing a corsair squad to test out my new colour scheme, but before even that happens I needed to sort out how I was gonna base the army up, I don't see a bunch of space pirates sporting squad markings so how to differentiate the squads since they'll be equipped similarly if not identically? I took inspiration from a guy I played against at the Spikey Clubs SVAXIII tournament earlier this year; he had a lovely Deathwatch Marine army who's individual marines each had their own chapter badge on 1 shoulder pad but no squad markings, so he'd used a unique base design for each squad, with all models in a squad having the same style of base. I liked this idea and I've stolen it and modified for my own needs.
My army represents a corsair raiding party assaulting an imperial base, so the bases will be cut-away sections of flooring complete with girders and ducting under the floor. Each squad will be identified by the type of flooring material they're stood on.

The flooring discs cut out for the first squad;

The bases with girders added. These are plastruct girder sections cut roughly to size;

Pipes and cables added;

The bases complete with the pipes and girders cut/filed and sanded to the shape of the base and with the flooring discs fixed on top;

A base with rivets added;

The rivets are made from the tiny plastic balls you find inside water filter cartridges. Each cartridge contains thousands of them as shown here,

Just drill a hole in the surface a little smaller than the ball and pop one in, I used a pair of pointy tweezers. It's a little fiddly but worth it. The filter cost a fiver and I don't think I'll ever run out!!

 The bases for the squad with rivets and some pipework coming up through the floor on one of them, this will be duplicated throughout the army.

That's the bases done, next is modelling the squad itself.

Til next time........

Bluddtoof

10